The Fox Carbine

Fox Carbine Parts

Please use the contact page to inquire about ordering parts. We will respond with a total including shipping and insurance. Sorry, but as this is more a hobby than a business, we only accept checks or money orders.

Fox Carbine Buffer $18.00 (plus shipping)

Newly manufactured Delrin buffer replaces the original buffer prone to deterioration. Buffers are machined to original Tri-C Fox Carbine production tolerances however minor fitting may be required. Instructions for proper fitment are posted on the message board.

Demro TAC-1/WASP Trigger Pack $250.00 (plus shipping)

Original Demro trigger packs complete and ready to install. This is a very hard part to come by and impossible to try and remake. Although these packs are for the Demro product line they will function in a Fox. The difference is the color of the trigger and the cutout for the safety lever.

Fox Carbine Upper Receiver/Trunnion $200.00 (plus shipping)

If you are looking for a quick change barrel solution this will make the change even easier. You can have your spare .45ACP or 9mm barrel already mounted in an upper receiver for an even faster change. This is also handy if you want to mount a rail or scope on your Fox or Demro.

Fox Carbine Fixed Stock *** SOLD OUT ***

This is an original fixed stock for the Fox and FoxCo series of carbines. These are identified by having a gold butt plate which matches the gold trigger of these models. These are original stocks manufactured some 40 years ago. We only have a couple of these left, and when they are gone, they are gone forever.

Demro TAC-1 Fixed Stock *** SOLD OUT ***

This is an original fixed stock for the Demro TAC-1 series of carbines. These are identified by having a black butt plate which matches the black trigger of these models. These are original stocks manufactured some 35 years ago. We only have a few of these, and when they are gone, they are gone forever.

Fox/Demro Stock Mounting Bracket *** SOLD OUT ***

Fixed stock mount for the Fox Carbine and Demro TAC-1series of carbines. These are original parts that adapt the walnut stock to the cast receiver in a removable configuration. We only have a couple of these, and when they are gone, they are gone forever.

Demro WASP Collapsible Stock *** SOLD OUT ***

This is a very rare collapsible stock designed by Gerry Fox and produced for the later Demro WASP model. These are original Demro manufacture NOS, which were made in response to requests by law enforcement at the time who desired a compact design. We have one left, and when it's gone... need I say more?

Fox/Demro NOS Wood Handguard $90.00 (plus shipping)

This is an original walnut hanguard for the Fox Carbine and Demro TAC-1 series carbines. These handguards are NOS and were manufactured some 40 years ago. We only have a few of these, and when they are gone, well, you know the drill by now.

Fox/Demro NOS Hand Grips *** SOLD OUT ***

If you have ever tried to find a pair of these then you know how rare these parts are. NOS, original walnut hand grips for the Fox Carbine and Demro TAC-1 series carbines. Yes, these are NOS, manufactured some 40 years ago. We only have a few of these available.

Original Hand Grip Fasteners $5.00 ea. (plus shipping)

These are original, velcro like fasteners used to secure the hand grips on the Fox Carbine and Demro TAC-1. Gerry wanted a design that required no tools for either assembly or disassembly. With these fasteners he was able to achieve that during the period.

Original Fox/Demro Bolt Body $200.00 (plus shipping)

These are original bolt bodies for the Fox and Demro series, open bolt carbines, accepting interchangeable bolt heads allowing for chambering either 9mm or .45ACP. These are original NOS parts from Dean Machine.

Original Fox/Demro Bolt Body (in the white) $50.00 (plus shipping)

These are original bolt bodies for the Fox and Demro series in the white. If you are handy with a drill, the hard work has already been done for you. A couple of holes, a quick heat and drench in an oil bath and you have a complete spare.

New Manufacture Fox Carbine Bolt $300.00 (plus shipping)

Newly manufactured bolt for the Fox Carbine and variants machined from 4140 stock then case hardened. This was a very limited run that took almost a year to go from CAD to reality. We are proud to have been able to reproduce this part and to offer it here.

Original Fox/Demro .45ACP Bolt Head $100.00 (plus shipping)

These are original .45ACP bolt heads for the Fox and Demro series, open bolt carbines. These heads allow for chambering .45ACP when used with a .45ACP barrel and M3A1 magazine. These are original NOS parts.

New Fox Carbine .45ACP Bolt Head $140.00 (plus shipping)

Newly manufactured .45ACP bolt head for the Fox Carbine bolt and variants machined from 4140 stock then case hardened. This was a very limited run that took almost a year to go from CAD to reality. We are proud to have been able to reproduce this part and to offer it here.

Original Fox/Demro 9mm Bolt Head *** SOLD OUT ***

These are original 9mm bolt heads for the Fox and Demro series, open bolt carbines. These heads allow for chambering 9mm when used with a 9mm barrel and Sten magazine. These are original NOS parts.

New Fox Carbine 9mm Bolt Head $140.00 (plus shipping)

Newly manufactured 9mm bolt head with feed lips. These bolt heads are machined from 4140 then case hardened. This was a very limited run that took almost a year to go from CAD to reality. We are proud to have been able to reproduce this part and to offer it here.

NOS 9mm Magazine Well Insert *** SOLD OUT ***

In order to convert a Fox type rifle to 9mm you need a magazine well insert. This is one of the most difficult parts to find and we happen to have originals in stock. These are somewhat cost prohibited to try and reproduce so when these are gone they will be gone forever!

*NEW* Delrin 9mm Magazine Well Insert $120.00 (plus shipping)

A reproduction of the original steel insert would have been too costly, so we came up with what we think is the best alternative. This is a new and improved version of 9mm magazine well insert made of Delrin. Because of the thickness of the final product, this has to be machined by hand so expect a four week lead time.

*RARE* NOS 9mm 5 Round Magazine $100.00 (plus shipping)

This is an original NOS 9mm, 5 round magazine. These are modified Sten magazines. These were made so well that you would never know that these were once much longer than they are now. For those in states where magazine capacity has become an issue, this is your solution.

NOS 9mm 15 Round Magazine $100.00 (plus shipping)

Original NOS 9mm, 15 round magazine. These are Sten magazines that have been modified to accept a total of 15 rounds. This makes the 9mm setup very comfortable to shoot as the magazine does not extend too far below the carbine. Not for sale where prohibited by law.

Charge Handle Flatface $50.00 or Scalloped $60.00 (plus shipping)

Newly manufactured charging handle that will fit all variation bolts.These handles are available with the original Tri-C Fox Carbine scalloped face or a more traditional Thompson M1A1 flat faced design. These are made to order so please allow 2 to 4 weeks for delivery.

New Fox Carbine Trunion Pin $20.00 (plus shipping)

This is a newly manufactured trunion pin for the Fox Carbine and variants. These pins are machined from 4140 stock to the original Tri-C Fox Carbine production tolerances. The pins were then case hardened. These were part of a very limited run of replacement parts that took almost a year to go from CAD to reality. We are proud to have been able to reproduce this part and to offer it here.

Fox Carbine Magazine Catch Spring $5.00 (plus shipping)

We have had many requests in the past for small parts including springs so by popular demand we are offering these as we have them available. This is a replacement compression spring for the magazine catch. Not only do these get lost while stripping the gun, they tend to lose rigidity over time. These are precision steel springs cut to original specifications.

Fox Carbine Extractor Spring $5.00 (plus shipping)

Here is another important small replacement part we are making available. This is a replacement compression spring for the cartridge extractor that rides on the bolt head. The original springs will lose rigidity over time and should be replaced. These are precision steel replacement springs cut to original specifications. This is another critical replacement part to keep your Fox type carbine running good as new.

Fox/Demro Receiver Latch Spring $5.00 (plus shipping)

Original NOS receiver latch springs for the Fox and Demro series carbines. This is the latch that holds the upper receiver down at the rear of the firearm. On early Fox models the letter I of the word THINK was engraved on this part. Later Demro models this was removed.

Fox/Demro Stock Release Spring $5.00 (plus shipping)

Original NOS stock release springs for the Fox and Demro series carbines. This spring provides load to the stock release button that holds the stock in place which is located on the charging handle side of the firearm. The button is held in place with a C-Clip.

Demro WASP Thumb Safety Spring $5.00 (plus shipping)

Original NOS thumb safety spring for the Demro WASP series carbines. This is for the WASP only, as the Fox and Demro TAC-1 models did not have a spring loaded thumb safety switch. The safety lever on the WASP model is keep under load with this spring and held in place with a C-Clip.

Fox.Demro Trigger Spring $5.00 (plus shipping)

Original NOS trigger spring for the Fox and Demro series carbines. This spring is integral to the trigger pack and is located just above where the trigger finger would rest. It is held in place between the trigger detent and the fork shaped tensioner.

NOS 9mm Fox Carbine Barrel $250.00 (plus shipping)

New old stock 9mm barrel for the Fox Carbine and variants. If you have a Fox in .45ACP and always wanted the 9mm option, now is your chance. We only have a handful of these, and Fox ain't making any more!

NOS 9mm Fox Carbine Barrel (in the white) $125.00 (plus shipping)

Original 9mm barrels in the white. The only work that needs to be done is cut the feed ramp and clean up the machining on the muzzle break holes. Everything else is complete. This is a great opportunity for someone who is handy with a dremmel and needs a barrel for a 9mm conversion setup.

NOS .45ACP Fox Carbine Barrel *** SOLD OUT ***

New old stock .45ACP barrel for the Fox Carbine and variants. This is new old stock, still in the factory wrapper. If you have a Fox in 9mm and always wanted the .45ACP option, now is your chance. We only have a couple of these left.